Products (296)

AN -8 30 Degree Swivel Seal Hose Fitting - Red and Blue High Quality, Anodised Aluminium Alloy, Reusable Hose Fittings that meets or exceeds the minimum requirements for aerospace and automotive hose fittings.

AN -8 90 Degree Swivel Seal Hose Fitting - Red and Blue High Quality, Anodised Aluminium Alloy, Reusable Hose Fittings that meets or exceeds the minimum requirements for aerospace and automotive hose fittings.

Stainless Steel Braided Hoses This stainless steel hose consists of a synthetic-nitrile inner tube with a partial stainless steel reinforcement inner braid. Covering the hose, there is a heavy duty, protective, full stainless steel braid on the outside, making it exceptionally lightweight, flexible, and durable. Even better, the hose is designed to handle any fuel (including methanol and nitromethane), oil, or coolant. Sold as per 1 Meter length. If you order more than 1 meter, it will come as a continuous length. Please enter the amount of meters you want in the quantity box above. These hoses are to be used with AN JIC Fittings, available seperately.

AN8 Nut for Bulkhead Fittings

AN8 Stainless Steel Braided, Teflon PTFE Lined Fuel Hose - 1 Meter non Permeable, No In Car Smell of Fuel This hose has a Teflon core with a protective stainless steel braid, making it very light and very durable. It's designed to handle fuel, oil, coolant, brake and power steering fluid, clutch and nitrous oxide. Please note this hose is only compatible with teflon hose fitting, all of which are available from our shop

AN8 180 Degree Teflon PTFE Hose Fitting - Red and Blue High Quality, Anodised Aluminium Alloy, Reusable Hose Fittings that meets or exceeds the minimum requirements for aerospace and automotive hose fittings. For use with Teflon PTFE Hoses

AN8 45 Degree Teflon PTFE Hose Fitting - Red and Blue For use with Teflon PTFE Hoses Replacement Olives Also Available

AN8 90 Degree Teflon PTFE Hose Fitting - Red and Blue For use with Teflon PTFE Hoses Replacement Olives Also Available

AN8 Straight Teflon PTFE Hose Fitting - Red and Blue For use with Teflon PTFE Hoses Replacement Olives Also Available

As required by MSA regulations for all types of motorsport. Designed to collect excess oil vapours from engine 1 Litre capacity 2 x push on fittings 10mm/12mm OD barb JIC/AN -6 threaded fittings Screw on breather cap, allows both pipe fittings to be linked to the engine breathers Includes side sight gauge & drain plug Unique design - The push-on hose fittings and sight gauge can be swapped over to left or right hand side to allow several installation options Plain aluminium finish

TIG welded aluminium1.5 Litre capacity2 x inlet fitting1 x feed fitting1 x return to tank fittingHigh quality fabricated tank, precision made in the UK

You are looking at one of our universal Alloy 1.5 litre Fuel Swirl Pot. This is designed to meet the requirements of the serious motorsports enthusiast who is using a fuel injected car for competition or fast road use. Benefits of a Swirl Pot: Reduces injection pump failure, Controls a supply of constant fuel, Will not starve the engine of fuel whilst hard cornering. Size: Base Mount 100mm Dia x 220mm 1.5 Ltr Fuel Swirl Pot, 3 x JIC 6 (1 x short, 2 x extended) , 1 x JIC 8 Outlet / Inlet pipes.

High performance oil cooler Lightweight pressed plate design Black powder coated finish Aluminium construction Designed to reduce oil temperature in high performance  Technical CharacteristicsNumber of rows: 10Fittings: 10ANMatrix width: 235mmHeight: 77mmCapacity: 0.2ltMax Pressure 145 PSIWeight: 0.71kg 

High Performance Oil Cooler - 10 Lightweight pressed plate design Black powder coated finish Aluminium construction Designed to reduce oil temperature in high performance engines, transmission, differentials etc. Technical CharacteristicsNumber of rows: 13Fittings: 10ANMatrix width: 235mmHeight: 100mmCapacity: 0.26ltMax Pressure 145 PSIWeight: 0.88kg 

High performance oil cooler Lightweight pressed plate design Black powder coated finish Aluminium construction Designed to reduce oil temperature in high performance engines, transmission, differentials etc. Technical CharacteristicsNumber of rows: 19Fittings: 10ANMatrix width: 235mmHeight: 147mmCapacity: 0.38ltMax Pressure 145 PSIWeight: 1.24kg

Top quality dry sump oil tank universal - De-Aeration headTIG welded aluminium2 gallon capacity5/8" BSP inlet3/4" BSP outletStandard capPush on breather outletUnique De-Aeration head design, removes air bubbles from oil Height (max) approx 44 cmLength (max) approx 29 cmWidth (max)  approx 22 cm High quality fabricated tank, precision made in the UK

Top quality Motamec dry sump oil tank universal with Monza filler capTIG welded aluminium2 gallon capacity5/8" BSP inlet and outletPush on breather outletDimensions:Height (max) approx 42 cmLength (max) approx 22cmWidth (max) approx 22 cmHigh quality fabricated tank, precision made in the UK

Top quality dry sump oil tank universalTIG welded aluminium2 gallon capacity5/8" BSP inlet and outletStandard capPush on breather outletDimensions:Height (max) approx 42 cmLength (max) approx 22cmWidth (max) approx 22 cmHigh quality fabricated tank, precision made in the UK

2 Gallon Under Bonnet Alloy Dry Sump Tank - Screw CapTop quality dry sump oil tank universal - De-Aeration headDesigned to be fitted under bonnet with our under bonnet fitting kit, available separateTIG welded aluminium2 gallon capacity5/8" BSP inlet3/4" BSP outletStandard capPush on breather outletUnique De-Aeration head design, removes air bubbles from oilHigh quality fabricated tank, precision made in the UK

3 meter pull cable with fittings Can be used with master switch / extinguisher systems

The aerodynamically efficient and styled AeroCatch® is setting new standards in panel fixing, providing a wide variety of fixing solutions for bodywork on vehicles. Options to mount and operate in top or side positions making suitable for lift off and hinged panels. Above Panel Simple installation Aluminium strike pins Lightweight, high strength Corrosion resistant and UV stable Top or side mounting Handle visible if not closed correctly Non trip hazard in closed position