Products

Suitable for chassis with 28mm tubing. Clamp is fitted to the chassis with the retaining wire secured around the bumper mounting. The kit will save...

 Suitable for chassis with 30mm tubing. Clamp is fitted to the chassis with the retaining wire secured around the bumper mounting. The kit will sav...

 A like for like replacement for the genuine OTK part.

 Used for adjusting OTK castor pill location & rear bumper bushes.

 UK MSA Approved.  Includes flush fitting front fixing bolt. Protectors are suitable for the EVR, EVRR, Viper, EVK, 401 & 401R chassis. Can be ...

Gives a castor angle in between standard zero and full castor. Ideal for where more release from rear corner grip is required. To fit M10 king pins...

To fit M10 king pins. The castor adjusters are available in a number of different options: DOT 1 - Provides the least amount of castor DOT 2 - Prov...

To fit M10 king pins. The castor adjusters are available in a number of different options: DOT 1 - Provides the least amount of castor DOT 2 - Prov...

To fit M10 king pins. The castor adjusters are available in a number of different options: DOT 1 - Provides the least amount of castor DOT 2 - Prov...

To fit M10 king pins. The castor adjusters are available in a number of different options: DOT 1 - Provides the least amount of castor DOT 2 - Prov...

Bottle is 90mm in length.

Protects the slide, needle & spring when not in use. The case is threaded allowing the carb top to be screwed in place.  Please note no slide o...

Used to lock the flywheel in place to enable the clutch to be removed and preform other tasks.  Price is for a single tool.

Used to lock the flywheel in place to enable the clutch to be removed and preform other tasks.  Price is for a single tool.

 Designed for the Dellorto Rotax Max jets. Allows the user to screw & unscrew the jet from the carb without the risk of damaging the head.  

 Designed for the Dellorto Rotax Max jets. Allows the user to screw & unscrew the jet from the carb without the risk of damaging the head.  

 Designed for the Dellorto Rotax Max jets. Allows the user to screw & unscrew the jet from the carb without the risk of damaging the head.

Multiple use spanner; Allows for the removal of the carb nut, easy removal and installation of the jet screw and storage for up to 12 jets. There i...

Fit these inside your rear hubs to stop them moving in on the axle.  Sizes; 2mm, 3mm, 5mm, 10mm, 15mm. 

M6 thread - 35mm in length.  Zinc plated. Includes washer & nylon nut. 

Zinc plated. Perfect for sprockets, floor trays, side pods & more. 

 Please click to view the full description. 17mm inner diameter - 10mm wide.

 Please click to view the full description. 17mm inner diameter - 5mm wide.